 |
 |
CAN-AM CHAINS is a premier manufacturer of a wide variety of welded steel, specialty chains, bearings, sprockets and engineered plastics for the forest products and waste water treatment industries. With a reputation for performance and reliability, CAN-AM CHAINS include roller chains and welded chains, such as mill chains, drag chains, malleable chains and power transmission chains. Whenever chain performance means productivity, CAN-AM CHAINS Delivers!
CAN-AM Manganese Steel Mill Chains have a 12.5 percent manganese content and wear extremely well on transfer and in feed/out feed chains. The running and contact surfaces work harden to a high brinnel hardness which extends chain life.
CAN-AM Sewerage Treatment Plant Chains of welded steel construction provide a superior alternative to traditional malleable chains. A higher ultimate strength, and fabricated from alloy steel, allow for the longest possible life on sedimentation tank, bar screen, and grit channel applications.
POWER TRANSMISSION CHAINS are widely used throughout the lumber industry in a broad range of conveying, transmission, and elevating applications. They are available in either offset or straight sidebar design. The majority of bushed roller chains are best suited for slow or moderate speed drive and conveyor applications since they are made to commercial standards for clearance, fits, and limits. Broaches on one end of the rivet and flats on both ends of the bushing prevent these parts from rotating in the sidebar holes.
These chains are widely used throughout the industry with our cast steel bullnose or other special attachments for use on trim tables.
|
 |
Zero = no roller
Letter designation of material
C: carbon steel
CH: carbon steel heat treated
CC: carbon steel case hardened
AH: alloy steel heat treated
AC: alloy steel case hardened
Tabular dimensions and weights are approximate and non-binding.
Design improvements may result in variations to published figures.
Verification is recommended.
Rooftop and Camelback are widely used in the lumber industry on transfer decks, where the load is carried transversely on two or more strands of chain and entry or discharge is endways. Maximum advisable speed is 100 feet per minute.
Tabular dimensions and weights are approximate and non-binding.
Design improvements may result in variations to published figures.
Verification is recommended.
CAN-AM WELDED STEEL DRAG CHAINS provide efficient and economical service when used in chip and sawdust conveyors, and like applications. Features include original formed barrel design for complete rivet to barrel contact for maximum rivet wear, higher impact strength, weldability of attachments and option of heat treating and/or induction hardening specific parts.
