 |
 |
Can-Am non-metallic Channex's are an alternative to conventional steel channels for mill and roller chain ways. The UHMW-PE material extends chain life by reducing the coefficient of friction of the chain and reduce noise decibels in your facility. Standard and custom sizes are available for all chain types and styles.
CAN-AM kiln cart bushings replace conventional needle bearings.
|
|
REGULAR DUTY |
HEAVY DUTY |
| MATERIAL | EXP3000 | *CIP323 |
| PSI | 2,500 | 15,000 |
| Temperature | 250F | 400 F |
| Lubrication | annually | none |
CAN-AM CHAINS UHMW Tru/trak inserts for C3 & C4 steel channel, give maximum life and performance results. The tru/trak feature supports the barrel and sidebar equally, allowing for heavier loading, and carrying capacity.
This feature also maintains center chain tracking thru the sprocket and eliminates sidebar and rivet damage.
Minimum coefficient of friction and noise reduction are additional benefits for any retrofit or new installation.
CAN-AM Acetal chains are designed for use in non-marking and corrosive applications. They are great alternatives to conventional steel chains, when conditions demand the unique features.
CAN-AM Acetal chains are used in and around dip tanks, finished lumber, and sewage treatment, just a couple of examples of environments that call for alternative solutions.
Specifications:
CAN-AM Shock Stop is a specially formulated material that isolates shock and impact, at its source. This, along with its ability to minimize rebound, results in a measurable cost savings by reducing structural maintenance and product damage.
CAN-AM Shock Stop is custom manufactured. It's available A) plain, B) bonded to steel, and C) bonded to steel c/w steel face plate. Log Stops, Cant Stops, Board Stops, and Bulk Material Landing Areas are typical applications.
CAN-AM Shock Stop
A) Plain - Bolted, Encased
B) Bonded to steel - Bolted, Welded
C) Magna-Plate Fastening
